Skip to main content

Building Permit for Commercial Retaining Wall

A permit is required to install a retaining wall if the height of the wall measured from the bottom of the footing to the top of the wall is 54 inches or more or any height retaining wall that supports a surcharge. The application packet must include two (2) copies of a site plan, and two copies of the structural drawings. The structural drawings must be signed and sealed by the engineer of record for the design of the wall, and must include the height of the wall and finished grade. The site plans must show where the retaining wall will be located on the property, the distance to the property line, any easements, and any existing utilities that run through or are in the zone of influence . The purpose of the site plan is to determine whether or not the zoning setback requirements for the location and height of the fence / retaining wall have been met.

Online users who have additional questions and would like to be contacted by a departmental staff member may submit a request by clicking on the Create Service Request button below. Please complete all of the fields in the Contact Information section, provide the property address in the Service/Incident Address information section and provide a brief description of the request and height of retaining wall to be constructed in the Brief Description field.

Find more information from the following link(s):

Last Updated: 01/08/2019 15:35:18